- Restoring an aging commercial flat roof with a high-solids silicone coating ($3.50–$6.00/sq. ft.) instead of a full TPO tear-off ($8.50–$14.50/sq. ft.) cuts CapEx by 45%–55%, avoids landfill tear-off disruption, and often qualifies as a 100% immediate maintenance tax deduction.
- Commercial Rooftop Packaged Units (RTUs) average $2,400–$3,800 per cooling ton installed in 2026 (including crane rigging, curb adapters, and economizers)—meaning a 10-ton unit runs $24,000–$38,000 turnkey.
- Industrial warehouse epoxy flooring ($4.50–$8.50/sq. ft.) requires diamond-grinding concrete prep (CSP-3) and moisture-vapor testing—skipping prep is the #1 reason cheap coatings peel under forklift traffic within 12 months.
- Requiring 3–4 standardized commercial bids with identical COI limits ($2M GL + Workers' Comp) and spec sheets routinely saves property managers 20%–35%.
Facility managers, warehouse operators, retail landlords, and HOA boards face the same three big-ticket capital expenses (CapEx) every decade: flat roof leaks, aging rooftop HVAC units (RTUs), and deteriorating concrete floors.
Because commercial contractors price risk, crane logistics, and night/weekend labor very differently, accepting a single incumbent vendor’s proposal routinely costs property owners 20% to 35% more than market rate. This pillar guide benchmarks real 2026 commercial pricing across all three systems so you can bid smarter.
1. Commercial Flat Roofs: Silicone Coating Restoration vs. Full TPO Tear-Off
Before approving a $140,000 full tear-off on a 12,000 sq. ft. retail or industrial roof, order an infrared moisture scan ($800–$1,500). If 75%+ of the insulation board is dry, fluid-applied restoration can extend roof life by 15–20 years with zero tenant disruption:
| Commercial Roofing Option | 2026 Installed Cost / Sq. Ft. | Typical Warranty | Tax & Operational Advantage |
|---|---|---|---|
| High-Solids Silicone Roof Coating | $3.50 – $6.00 / sq. ft. | 10–20 yr renewable NDL | Often 100% Year-1 maintenance expense; resists ponding water |
| TPO Overlay (Single-Layer Recover) | $6.50 – $9.50 / sq. ft. | 15–20 yr NDL | Skips tear-off landfill fees if only 1 existing roof layer |
| Full Tear-Off + 60-Mil TPO / EPDM | $9.00 – $14.50 / sq. ft. | 20–30 yr NDL | Required when wet insulation exceeds 25% or deck is rusted |
Compare specialized Commercial Flat Roofing & Silicone Coating bids before committing to a tear-off.
2. Commercial Rooftop HVAC (RTU) Replacement Costs (2026)
Standard commercial packaged Rooftop Units (Trane, Carrier, Lennox, York) last 12 to 18 years (shorter in coastal salt air or grease-heavy restaurant exhaust zones). Budget $2,400 to $3,800 per ton turnkey in 2026:
- 5-Ton to 7.5-Ton Retail / Office RTU: $13,500 – $24,500 installed
- 10-Ton to 15-Ton Warehouse / Medical RTU: $24,000 – $48,000 installed
- 20-Ton to 25-Ton Large Commercial RTU: $46,000 – $85,000+ installed
Always pair new RTU installations with a quarterly Preventive Maintenance (PM) contract (compare Commercial HVAC contracts) covering belt tension, coil washing, economizer damper calibration, and filter changes—preventing emergency $1,800 weekend service calls.
3. Warehouse Epoxy, Polyaspartic & Commercial Kitchen Flooring
Industrial floor failure is almost never the resin’s fault—it is poor surface preparation. Every written proposal from our Commercial Epoxy Flooring network should specify:
- Mechanical Diamond Grinding or Shot-Blasting to CSP-3 Profile (never accept acid-etching on commercial concrete).
- Calcium Chloride / RH Moisture Vapor Testing — high slab moisture requires a dedicated Moisture Vapor Barrier (MVB) primer coat.
- Right Resin for the Environment:
- High-Build 100% Solids Epoxy + Urethane Topcoat ($4.50 – $8.50/sq. ft.): Best for distribution warehouses, manufacturing bays, and hangars.
- Polyaspartic Fast-Cure System ($6.00 – $10.50/sq. ft.): 1-day return to service for retail showrooms and auto dealerships with zero yellowing.
- Urethane Cement ($9.00 – $16.00/sq. ft.): Mandatory for commercial kitchens, breweries, and cold-storage washdown zones.
4. Bid-Leveling Checklist for Facility Managers
Send the exact same 1-page scope to 3–4 vetted commercial contractors and require:
- Active COI ($2M GL aggregate, Workers’ Comp, Commercial Auto) + state contractor license
- Itemized crane/lift fees, dumpsters, and night/weekend shift premiums
- Exact manufacturer product data sheets and NDL (No Dollar Limit) warranty terms
Compare vetted commercial proposals today via our Commercial Roofing, Commercial HVAC, Commercial Epoxy Flooring, and Commercial Pressure Washing hubs—or click any quote button on this page to request competing bids in 60 seconds.
Compare Local Rates & Vetted Providers Mentioned in This Guide
Jump straight to our dedicated local quote pages for state-specific pricing, local contractor directories, and instant side-by-side comparisons:
Frequently Asked Questions
When can a commercial flat roof be coated with silicone instead of torn off?
If an infrared moisture scan confirms less than 20%–25% of the underlying insulation is wet and the structural deck is sound, wet sections can be spot-replaced and the entire roof sealed with a 15- to 20-year NDL-warranted silicone or acrylic fluid-applied membrane at roughly half the cost of full TPO tear-off.
Why do commercial HVAC RTU quotes vary by $12,000+ for the same tonnage?
Big swings come from crane lift logistics (street closure permits vs. parking-lot reach), custom steel curb adapters, BAS/building automation controls integration, and whether the contractor quotes standard efficiency vs. high-efficiency IEER variable-speed units.
Should a commercial kitchen use epoxy or urethane cement flooring?
Commercial kitchens, breweries, and food-processing plants MUST use thermal-shock-resistant urethane cement ($9–$16/sq. ft.), not standard epoxy. Boiling washdown water and fryer heat cause standard epoxy to blister and delaminate.
What insurance limits should facility managers require before awarding a commercial bid?
Always require an active COI naming your property LLC/HOA as Additional Insured with at least $1M per occurrence / $2M aggregate General Liability, $1M Commercial Auto, statutory Workers' Compensation, and a $2M–$5M Umbrella policy for crane or high-rise exterior work.